To purchase your Trellis Cable Kit:

Option 1. Swaged cable with 130mm Overhead Hangers and end attachments

Attach overhead hangers to hoops.

Each Trellis Cable Kit contains;

• 3mm 304 stainless steel wire cable with a swaged eyelet on one end, 500mm longer than the Kit length. Example: a 15m kit has a 15.5m cable, allowing enough cable at the non swaged end to be double clamped with the clamps provided.
• 2 x 35mm Brace Bands to for attachment to the end tunnel hoops.
• 130mm stainless steel droppers and 12g Self driving screw for every hoop connection point.
• 2 x 3.2mm clamps for attaching cable at other end.

• Wind Bracing
• Solid Centre purlin

Recommended:

• 400mm Lift Kit or Pro Tunnel

Option 2. Swaged cable with end attachments

Attach to end hoop door header pole or cross bracing trellis poles.

This option does not use hangers, instead the Trellis Cable Kit will be supported by existing cross bracing trellis poles and attached at either end by 35mm Brace Bands to the end hoop door header pole or cross bracing trellis pole. NOTE: To avoid the header pole being pulled inwards from crop weight we recommend using our telescopic pole diagonally by attaching from the centre of the header pole on the last hoop, upwards and inwards to the centre purlin pole just before it intersects with the 2nd hoop, (see image).

Each Trellis Cable Kit contains;

• 3mm 304 stainless steel wire cable with a swaged eyelet on one end, 500mm longer than the Kit length. Example: a 15m kit has a 15.5m cable, allowing enough cable at the non swaged end to be double clamped with the clamps provided.
• 2 x 35mm Brace Bands to for attachment to the end hoop Door Header Pole/Cross Trellis Bracing Pole.
• 2 x 3.2mm clamps for attaching cable at other end

• Steel Framed End Walls or
• Cross Bracing Trellis Poles